Swiss Gear Wireless Mouse Driver

Mac Manual Re-Connect Mouse to Receiver - Changing the Wireless Connection Channel: Note: Turn mouse on first. Plug in USB Receiver.(4) 2.While USB receiver is plugged in, press button on the top of the receiver. (5) 3.Click mouse 'CONNECT' button once on bottom of mouse within 5 seconds after clicking the 'CONNECT' button on the receiver.
(4) (Windows will now detect the mouse and install the required drivers automatically and the light will blink when in use.) RECEIVER STORAGE/ TURN MOUSE ON-OFF Manual Re-Connect Mouse to Receiver Changing the Wireless Connection Channel: GA-6290-15 CAUTION LASER RADIATION. DO NOT STARE INTO THE BEAM OR VIEW DIRECTLY WITH OPTICAL INSTRUMENTS.
Solution 4: Reinstall The Wireless Mouse Driver. If your wireless mouse has stopped working on your Windows 10 system, then you can try reinstalling the driver. Step 1: To open the Device Manager, you have to click on the Windows key and the X key. Step 2: Choose Mice and other pointing devices and select the input device.

Having trouble with a device? Make sure everything is connected properly, the device has power, and that it’s set up correctly.

First, try checking your hardware

Unplug USB cables and wait for a little while for the device driver to be unloaded by Windows, and then plug the device back in.
Try using a different USB port on your PC.
If you use a USB hub between the device and the PC, make sure the hub has power. If it’s still not working, try removing the USB hub and plugging the device directly into a USB port on the PC.
Make sure that the cables on your device aren't damaged in any way.
Check any battery-powered devices to see if they are fully charged or have fresh batteries.
Make sure there’s no dirt blocking keys or sensors.

Check your wireless connections

Look on the bottom of the wireless device for a Reset button. Resetting the device will disconnect and then reconnect the wireless connection. There might also be a Reset button on the USB receiver for your device.
For USB wireless devices, this might be as simple as unplugging the USB wireless receiver, waiting for about 10 seconds, and then plugging the USB wireless receiver back into the USB port. The wireless connection should be reestablished.

For software and drivers select your product from the list below. Wireless Mouse 1000. Mouse and Keyboard Center 11. Windows 10 (64-bit only).

Check the device

If the device doesn't appear to work at all (no lights appear on the device when it’s plugged in, or the cursor doesn't move or doesn't appear on the screen), connect the device to another PC and make sure the device works on that PC. If the device doesn't work on the other PC, you might need to replace it.

Note: Some devices won't work without installing a driver. When testing the device on another PC, make sure that you have the correct driver installed for the device.

Try the Windows 7 Troubleshooter

To run the Hardware and Devices troubleshooter in Windows 7:

Swissgear wireless mouse driver for laptop

Open the Hardware and Devices troubleshooter by clicking the Start button, and then clicking Control Panel.
In the search box, enter troubleshooter, then select Troubleshooting.
Under Hardware and Sound, select Configure a device.

Hardware Troubleshooter Drivers